Tom Coyle
- Courses7
- Reviews17
- School: University of Toronto
- Campus: St. George Campus
- Department: Materials Engineering
- Email address: Join to see
- Phone: Join to see
-
Location:
Toronto, ON - Dates at University of Toronto: May 2002 - March 2011
- Office Hours: Join to see
Biography
University of Toronto St. George Campus - Materials Engineering
Vice Dean of Undergraduate Studies at the Faculty of Applied Science and Engineering, University of Toronto
Higher Education
Tom
Coyle
Toronto, Ontario, Canada
Professor Thomas Coyle, whose term as Vice-Dean began in April 2015, joined the Faculty of Applied Science and Engineering in 1989. He has served as Associate Chair, Graduate Studies (2013-2015), and as Acting Associate Chair, Undergraduate Studies, for the Department of Materials Science and Engineering. For a number of years he was Chair of the Faculty’s Examinations Committee, and previously the Scholarship Committee. He has taught a variety of undergraduate and graduate courses, and enjoyed teaching first year students as course coordinator and lecturer for MSE101 from its introduction in 1995 to 2010.
He is the Associate Director of the Centre for Advanced Coating Technologies (CACT), a multidisciplinary research centre established in 1998. The CACT team was awarded the NSERC Brockhouse Canada Prize for Interdisciplinary Research in Science & Engineering in 2009. His professional contributions include terms as President of the Canadian Ceramic Society (2001-2002), Chair of the Board of Directors of the Canadian University-Industry Council on Advanced Ceramics (1991-1994), editor of the Journal of the Canadian Ceramic Society (1999-2003), and co-editor of conference proceedings for the 17th International Symposium on Plasma Chemistry (2005) and the 1st International Ceramics Congress (2006).
His research activities are currently focused on the development and characterization of ceramic, metallic, and composite coatings. Other research interests include powder processing of ceramics, metal alloys, and composites, microstructure development, and brittle fracture behavior.
Experience
University of Toronto
Associate Professor
Tom worked at University of Toronto as a Associate Professor
University of Toronto
Associate Chair, Graduate Studies
Tom worked at University of Toronto as a Associate Chair, Graduate Studies
University of Toronto
Vice-Dean of Undergraduate Studies
Tom worked at University of Toronto as a Vice-Dean of Undergraduate Studies
Education
Alfred University
B.A.
Chemistry
Alfred University
B.S.
Ceramic Science
Massachusetts Institute of Technology
Sc.D.
Ceramic Science and Engineering
Publications
Fabrication of High-Temperature Heat Exchangers by Plasma Spraying Exterior Skins on Nickel Foams
Journal of Thermal Spray Technology
Fabrication of High-Temperature Heat Exchangers by Plasma Spraying Exterior Skins on Nickel Foams
Journal of Thermal Spray Technology
Numerical Study of Suspension Plasma Spraying
Journal of Thermal Spray Technology
Fabrication of High-Temperature Heat Exchangers by Plasma Spraying Exterior Skins on Nickel Foams
Journal of Thermal Spray Technology
Numerical Study of Suspension Plasma Spraying
Journal of Thermal Spray Technology
Fabrication of Superhydrophobic Ceramic Coatings via Solution Precursor Plasma Spray Under Atmospheric and Low-Pressure Conditions
Journal of Thermal Spray Technology
Fabrication of High-Temperature Heat Exchangers by Plasma Spraying Exterior Skins on Nickel Foams
Journal of Thermal Spray Technology
Numerical Study of Suspension Plasma Spraying
Journal of Thermal Spray Technology
Fabrication of Superhydrophobic Ceramic Coatings via Solution Precursor Plasma Spray Under Atmospheric and Low-Pressure Conditions
Journal of Thermal Spray Technology
Optimization of Grit-Blasting Process Parameters for Production of Dense Coatings on Open Pores Metallic Foam Substrates Using Statistical Methods
Journal of Thermal Spray Technology
Fabrication of High-Temperature Heat Exchangers by Plasma Spraying Exterior Skins on Nickel Foams
Journal of Thermal Spray Technology
Numerical Study of Suspension Plasma Spraying
Journal of Thermal Spray Technology
Fabrication of Superhydrophobic Ceramic Coatings via Solution Precursor Plasma Spray Under Atmospheric and Low-Pressure Conditions
Journal of Thermal Spray Technology
Optimization of Grit-Blasting Process Parameters for Production of Dense Coatings on Open Pores Metallic Foam Substrates Using Statistical Methods
Journal of Thermal Spray Technology
Fabrication of micro-/nano-structured superhydrophobic ceramic coating with reversible wettability via a novel solution precursor vacuum plasma spray process
Materials & Design
Fabrication of High-Temperature Heat Exchangers by Plasma Spraying Exterior Skins on Nickel Foams
Journal of Thermal Spray Technology
Numerical Study of Suspension Plasma Spraying
Journal of Thermal Spray Technology
Fabrication of Superhydrophobic Ceramic Coatings via Solution Precursor Plasma Spray Under Atmospheric and Low-Pressure Conditions
Journal of Thermal Spray Technology
Optimization of Grit-Blasting Process Parameters for Production of Dense Coatings on Open Pores Metallic Foam Substrates Using Statistical Methods
Journal of Thermal Spray Technology
Fabrication of micro-/nano-structured superhydrophobic ceramic coating with reversible wettability via a novel solution precursor vacuum plasma spray process
Materials & Design
Brazing Strategies for High Temperature Ultrasonic Transducers Based on LiNbO3 Piezoelectric Elements
Instruments
Fabrication of High-Temperature Heat Exchangers by Plasma Spraying Exterior Skins on Nickel Foams
Journal of Thermal Spray Technology
Numerical Study of Suspension Plasma Spraying
Journal of Thermal Spray Technology
Fabrication of Superhydrophobic Ceramic Coatings via Solution Precursor Plasma Spray Under Atmospheric and Low-Pressure Conditions
Journal of Thermal Spray Technology
Optimization of Grit-Blasting Process Parameters for Production of Dense Coatings on Open Pores Metallic Foam Substrates Using Statistical Methods
Journal of Thermal Spray Technology
Fabrication of micro-/nano-structured superhydrophobic ceramic coating with reversible wettability via a novel solution precursor vacuum plasma spray process
Materials & Design
Brazing Strategies for High Temperature Ultrasonic Transducers Based on LiNbO3 Piezoelectric Elements
Instruments
A New High-Temperature Ultrasonic Transducer for Continuous Inspection
IEEE Transactions on Ultrasonics, Ferroelectrics and Frequency Control
Fabrication of High-Temperature Heat Exchangers by Plasma Spraying Exterior Skins on Nickel Foams
Journal of Thermal Spray Technology
Numerical Study of Suspension Plasma Spraying
Journal of Thermal Spray Technology
Fabrication of Superhydrophobic Ceramic Coatings via Solution Precursor Plasma Spray Under Atmospheric and Low-Pressure Conditions
Journal of Thermal Spray Technology
Optimization of Grit-Blasting Process Parameters for Production of Dense Coatings on Open Pores Metallic Foam Substrates Using Statistical Methods
Journal of Thermal Spray Technology
Fabrication of micro-/nano-structured superhydrophobic ceramic coating with reversible wettability via a novel solution precursor vacuum plasma spray process
Materials & Design
Brazing Strategies for High Temperature Ultrasonic Transducers Based on LiNbO3 Piezoelectric Elements
Instruments
A New High-Temperature Ultrasonic Transducer for Continuous Inspection
IEEE Transactions on Ultrasonics, Ferroelectrics and Frequency Control
Superhydrophobic ceramic coating: Fabrication by solution precursor plasma spray and investigation of wetting behavior
Journal of Colloid and Interface Science
Fabrication of High-Temperature Heat Exchangers by Plasma Spraying Exterior Skins on Nickel Foams
Journal of Thermal Spray Technology
Numerical Study of Suspension Plasma Spraying
Journal of Thermal Spray Technology
Fabrication of Superhydrophobic Ceramic Coatings via Solution Precursor Plasma Spray Under Atmospheric and Low-Pressure Conditions
Journal of Thermal Spray Technology
Optimization of Grit-Blasting Process Parameters for Production of Dense Coatings on Open Pores Metallic Foam Substrates Using Statistical Methods
Journal of Thermal Spray Technology
Fabrication of micro-/nano-structured superhydrophobic ceramic coating with reversible wettability via a novel solution precursor vacuum plasma spray process
Materials & Design
Brazing Strategies for High Temperature Ultrasonic Transducers Based on LiNbO3 Piezoelectric Elements
Instruments
A New High-Temperature Ultrasonic Transducer for Continuous Inspection
IEEE Transactions on Ultrasonics, Ferroelectrics and Frequency Control
Superhydrophobic ceramic coating: Fabrication by solution precursor plasma spray and investigation of wetting behavior
Journal of Colloid and Interface Science
Twin wire arc spray process modification for production of porous metallic coatings
Surface & Coatings Technology
Fabrication of High-Temperature Heat Exchangers by Plasma Spraying Exterior Skins on Nickel Foams
Journal of Thermal Spray Technology
Numerical Study of Suspension Plasma Spraying
Journal of Thermal Spray Technology
Fabrication of Superhydrophobic Ceramic Coatings via Solution Precursor Plasma Spray Under Atmospheric and Low-Pressure Conditions
Journal of Thermal Spray Technology
Optimization of Grit-Blasting Process Parameters for Production of Dense Coatings on Open Pores Metallic Foam Substrates Using Statistical Methods
Journal of Thermal Spray Technology
Fabrication of micro-/nano-structured superhydrophobic ceramic coating with reversible wettability via a novel solution precursor vacuum plasma spray process
Materials & Design
Brazing Strategies for High Temperature Ultrasonic Transducers Based on LiNbO3 Piezoelectric Elements
Instruments
A New High-Temperature Ultrasonic Transducer for Continuous Inspection
IEEE Transactions on Ultrasonics, Ferroelectrics and Frequency Control
Superhydrophobic ceramic coating: Fabrication by solution precursor plasma spray and investigation of wetting behavior
Journal of Colloid and Interface Science
Twin wire arc spray process modification for production of porous metallic coatings
Surface & Coatings Technology
Efficient one-step fabrication of ceramic superhydrophobic coatings by solution precursor plasma spray
Materials Letters
