University of Michigan - Chemistry
Assistant Professor at Loyola University Chicago
Higher Education
James
Devery
Chicago, Illinois
Assistant professor specializing in determination of organic reaction mechanisms utilizing physical organic techniques.
Specialties: NMR, GC-MS, UPLC, FT-IR, stopped-flow spectrophotometry, React-IR, cyclic voltammetry
Teaching Assistant
Determination of the mechanistic properties of the Ce(IV)-mediated oxidation of 1,3-dicarbonyls. Development of new synthetic route to tetrasubstituted pyrazoles. Determination of the mechanistic properties of organo-SOMO activation.
Teaching assistant for Organic and General Chemistry laboratories.
Research Fellow
Graduate student at Lehigh University working towards my Ph.D. in organic chemistry. I am working as a university fellow.
Teaching Assistant
Teaching assistant for Chemical Physics and Bonding, Organic Analysis Laboratory, Organic Chemistry I, and Organic Chemistry II
Postdoctoral Fellow
Determination of the kinetic and mechanistic properties of a visible light-mediated single electron reduction of carbon halogen bonds and the development of a new, mild reductive debromination of unactivated carbon-bromide bonds.
Postdoctoral Fellow
Determination of the kinetic and mechanistic properties of a visible light-mediated single electron reduction of carbon halogen bonds and the development of a new, mild reductive debromination of unactivated carbon-bromide bonds.
Assistant Professor
James worked at Loyola University Chicago as a Assistant Professor
B.S.
Chemistry
Research: Mechanistic studies of the oxidation of beta-dicarbonyls
Adviser: Professor Robert A. Flowers
Ph.D
Organic Chemistry
Thesis title: "The Development and Optimization of Ce(IV)-Mediated Single Electron Oxidative Coupling Reactions"
Teaching Assistant
Determination of the mechanistic properties of the Ce(IV)-mediated oxidation of 1,3-dicarbonyls. Development of new synthetic route to tetrasubstituted pyrazoles. Determination of the mechanistic properties of organo-SOMO activation.
Teaching assistant for Organic and General Chemistry laboratories.
Research Fellow
Graduate student at Lehigh University working towards my Ph.D. in organic chemistry. I am working as a university fellow.
Teaching Assistant
Teaching assistant for Chemical Physics and Bonding, Organic Analysis Laboratory, Organic Chemistry I, and Organic Chemistry II
The Journal of Organic Chemistry
We report a rapid, one-pot, operationally simple, and scalable preparation of valuable cationic heteroleptic iridium(III) polypyridyl photosensitizers. This method takes advantage of two consecutive microwave irradiation steps in the same reactor vial, avoiding the need for additional reaction purifications. A number of known heteroleptic iridium(III) complexes are prepared in up to 96% yield. Notably, this method is demonstrated to provide the synthetically versatile photosensitizer [Ir(ppy)2(dtbbpy)]PF6 in >1 g quantities in less than 5 h of bench time. We envision this method will help accelerate future developments in visible-light-dependent chemistry.
The Journal of Organic Chemistry
We report a rapid, one-pot, operationally simple, and scalable preparation of valuable cationic heteroleptic iridium(III) polypyridyl photosensitizers. This method takes advantage of two consecutive microwave irradiation steps in the same reactor vial, avoiding the need for additional reaction purifications. A number of known heteroleptic iridium(III) complexes are prepared in up to 96% yield. Notably, this method is demonstrated to provide the synthetically versatile photosensitizer [Ir(ppy)2(dtbbpy)]PF6 in >1 g quantities in less than 5 h of bench time. We envision this method will help accelerate future developments in visible-light-dependent chemistry.
Chemical Science
Knowledge of the kinetic behavior of catalysts under synthetically relevant conditions is vital for the efficient use of compounds that mediate important transformations regardless of their composition or driving force. In particular, these data are of great importance to add perspective to the growing number of applications of photoactive transition metal complexes. Here we present kinetic, synthetic, and spectroscopic evidence of the mechanistic behavior of fac-Ir(ppy)3 in a visible light-mediated radical addition to 3-methylindole, demonstrating the instability of fac-Ir(ppy)3 under these conditions. During the reaction, rapid in situ functionalization of the photocatalyst occurs, eventually leading to deactivation. These findings demonstrate a conceivable deactivation process for catalytic single electron reactions in the presence of radicophilic ligands. Attempts to inhibit photocatalyst deactivation through structural modification provide further insight into catalyst selection for a given system of interest.
The Journal of Organic Chemistry
We report a rapid, one-pot, operationally simple, and scalable preparation of valuable cationic heteroleptic iridium(III) polypyridyl photosensitizers. This method takes advantage of two consecutive microwave irradiation steps in the same reactor vial, avoiding the need for additional reaction purifications. A number of known heteroleptic iridium(III) complexes are prepared in up to 96% yield. Notably, this method is demonstrated to provide the synthetically versatile photosensitizer [Ir(ppy)2(dtbbpy)]PF6 in >1 g quantities in less than 5 h of bench time. We envision this method will help accelerate future developments in visible-light-dependent chemistry.
Chemical Science
Knowledge of the kinetic behavior of catalysts under synthetically relevant conditions is vital for the efficient use of compounds that mediate important transformations regardless of their composition or driving force. In particular, these data are of great importance to add perspective to the growing number of applications of photoactive transition metal complexes. Here we present kinetic, synthetic, and spectroscopic evidence of the mechanistic behavior of fac-Ir(ppy)3 in a visible light-mediated radical addition to 3-methylindole, demonstrating the instability of fac-Ir(ppy)3 under these conditions. During the reaction, rapid in situ functionalization of the photocatalyst occurs, eventually leading to deactivation. These findings demonstrate a conceivable deactivation process for catalytic single electron reactions in the presence of radicophilic ligands. Attempts to inhibit photocatalyst deactivation through structural modification provide further insight into catalyst selection for a given system of interest.
Synlett
The Journal of Organic Chemistry
We report a rapid, one-pot, operationally simple, and scalable preparation of valuable cationic heteroleptic iridium(III) polypyridyl photosensitizers. This method takes advantage of two consecutive microwave irradiation steps in the same reactor vial, avoiding the need for additional reaction purifications. A number of known heteroleptic iridium(III) complexes are prepared in up to 96% yield. Notably, this method is demonstrated to provide the synthetically versatile photosensitizer [Ir(ppy)2(dtbbpy)]PF6 in >1 g quantities in less than 5 h of bench time. We envision this method will help accelerate future developments in visible-light-dependent chemistry.
Chemical Science
Knowledge of the kinetic behavior of catalysts under synthetically relevant conditions is vital for the efficient use of compounds that mediate important transformations regardless of their composition or driving force. In particular, these data are of great importance to add perspective to the growing number of applications of photoactive transition metal complexes. Here we present kinetic, synthetic, and spectroscopic evidence of the mechanistic behavior of fac-Ir(ppy)3 in a visible light-mediated radical addition to 3-methylindole, demonstrating the instability of fac-Ir(ppy)3 under these conditions. During the reaction, rapid in situ functionalization of the photocatalyst occurs, eventually leading to deactivation. These findings demonstrate a conceivable deactivation process for catalytic single electron reactions in the presence of radicophilic ligands. Attempts to inhibit photocatalyst deactivation through structural modification provide further insight into catalyst selection for a given system of interest.
Synlett
ACS Catalysis
The Journal of Organic Chemistry
We report a rapid, one-pot, operationally simple, and scalable preparation of valuable cationic heteroleptic iridium(III) polypyridyl photosensitizers. This method takes advantage of two consecutive microwave irradiation steps in the same reactor vial, avoiding the need for additional reaction purifications. A number of known heteroleptic iridium(III) complexes are prepared in up to 96% yield. Notably, this method is demonstrated to provide the synthetically versatile photosensitizer [Ir(ppy)2(dtbbpy)]PF6 in >1 g quantities in less than 5 h of bench time. We envision this method will help accelerate future developments in visible-light-dependent chemistry.
Chemical Science
Knowledge of the kinetic behavior of catalysts under synthetically relevant conditions is vital for the efficient use of compounds that mediate important transformations regardless of their composition or driving force. In particular, these data are of great importance to add perspective to the growing number of applications of photoactive transition metal complexes. Here we present kinetic, synthetic, and spectroscopic evidence of the mechanistic behavior of fac-Ir(ppy)3 in a visible light-mediated radical addition to 3-methylindole, demonstrating the instability of fac-Ir(ppy)3 under these conditions. During the reaction, rapid in situ functionalization of the photocatalyst occurs, eventually leading to deactivation. These findings demonstrate a conceivable deactivation process for catalytic single electron reactions in the presence of radicophilic ligands. Attempts to inhibit photocatalyst deactivation through structural modification provide further insight into catalyst selection for a given system of interest.
Synlett
ACS Catalysis
Journal of the American Chemical Society
Iron(III)-catalyzed carbonyl-olefin ring-closing metathesis represents a new approach toward the assembly of molecules traditionally generated by olefin–olefin metathesis or olefination. Herein, we report detailed synthetic, spectroscopic, kinetic, and computational studies to determine the mechanistic features imparted by iron(III), substrate, and temperature to the catalytic cycle. These data are consistent with an iron(III)-mediated asynchronous, concerted [2+2]-cycloaddition to form an intermediate oxetane as the turnover-limiting step. Fragmentation of the oxetane via Lewis acid-activation results in the formation of five- and six-membered unsaturated carbocycles.
The Journal of Organic Chemistry
We report a rapid, one-pot, operationally simple, and scalable preparation of valuable cationic heteroleptic iridium(III) polypyridyl photosensitizers. This method takes advantage of two consecutive microwave irradiation steps in the same reactor vial, avoiding the need for additional reaction purifications. A number of known heteroleptic iridium(III) complexes are prepared in up to 96% yield. Notably, this method is demonstrated to provide the synthetically versatile photosensitizer [Ir(ppy)2(dtbbpy)]PF6 in >1 g quantities in less than 5 h of bench time. We envision this method will help accelerate future developments in visible-light-dependent chemistry.
Chemical Science
Knowledge of the kinetic behavior of catalysts under synthetically relevant conditions is vital for the efficient use of compounds that mediate important transformations regardless of their composition or driving force. In particular, these data are of great importance to add perspective to the growing number of applications of photoactive transition metal complexes. Here we present kinetic, synthetic, and spectroscopic evidence of the mechanistic behavior of fac-Ir(ppy)3 in a visible light-mediated radical addition to 3-methylindole, demonstrating the instability of fac-Ir(ppy)3 under these conditions. During the reaction, rapid in situ functionalization of the photocatalyst occurs, eventually leading to deactivation. These findings demonstrate a conceivable deactivation process for catalytic single electron reactions in the presence of radicophilic ligands. Attempts to inhibit photocatalyst deactivation through structural modification provide further insight into catalyst selection for a given system of interest.
Synlett
ACS Catalysis
Journal of the American Chemical Society
Iron(III)-catalyzed carbonyl-olefin ring-closing metathesis represents a new approach toward the assembly of molecules traditionally generated by olefin–olefin metathesis or olefination. Herein, we report detailed synthetic, spectroscopic, kinetic, and computational studies to determine the mechanistic features imparted by iron(III), substrate, and temperature to the catalytic cycle. These data are consistent with an iron(III)-mediated asynchronous, concerted [2+2]-cycloaddition to form an intermediate oxetane as the turnover-limiting step. Fragmentation of the oxetane via Lewis acid-activation results in the formation of five- and six-membered unsaturated carbocycles.
Journal of the American Chemical Society
Iron(III)-catalyzed carbonyl-olefin ring-closing metathesis employs reactivity not typically observed in Lewis acid-catalyzed reactions. In converting a ketone with a pendant olefin into a cycloalkene and a simple carbonyl byproduct, the reaction requires the Lewis acid catalyst to differentiate between the carbonyl of the substrate and that of the byproduct. It is necessary to determine how this solution interaction imparts the desired reactivity in order to best employ this method. Herein, we report detailed kinetic, spectroscopic, and colligative measurements applied towards the identification of the solution structures of the active Fe(III) and Ga(III) carbonyl-olefin metathesis catalysts. These data are consistent with formation of Lewis acid-carbonyl pairs for both metal systems under stoichiometric conditions. However, they diverge in the presence of higher equivalents of carbonyl, with Fe(III) forming highly ligated complexes, and no observed change for Ga(III). These findings are consistent with the resting state identity of the Fe(III) metathesis catalyst changing over the course of the reaction.
The Journal of Organic Chemistry
We report a rapid, one-pot, operationally simple, and scalable preparation of valuable cationic heteroleptic iridium(III) polypyridyl photosensitizers. This method takes advantage of two consecutive microwave irradiation steps in the same reactor vial, avoiding the need for additional reaction purifications. A number of known heteroleptic iridium(III) complexes are prepared in up to 96% yield. Notably, this method is demonstrated to provide the synthetically versatile photosensitizer [Ir(ppy)2(dtbbpy)]PF6 in >1 g quantities in less than 5 h of bench time. We envision this method will help accelerate future developments in visible-light-dependent chemistry.
Chemical Science
Knowledge of the kinetic behavior of catalysts under synthetically relevant conditions is vital for the efficient use of compounds that mediate important transformations regardless of their composition or driving force. In particular, these data are of great importance to add perspective to the growing number of applications of photoactive transition metal complexes. Here we present kinetic, synthetic, and spectroscopic evidence of the mechanistic behavior of fac-Ir(ppy)3 in a visible light-mediated radical addition to 3-methylindole, demonstrating the instability of fac-Ir(ppy)3 under these conditions. During the reaction, rapid in situ functionalization of the photocatalyst occurs, eventually leading to deactivation. These findings demonstrate a conceivable deactivation process for catalytic single electron reactions in the presence of radicophilic ligands. Attempts to inhibit photocatalyst deactivation through structural modification provide further insight into catalyst selection for a given system of interest.
Synlett
ACS Catalysis
Journal of the American Chemical Society
Iron(III)-catalyzed carbonyl-olefin ring-closing metathesis represents a new approach toward the assembly of molecules traditionally generated by olefin–olefin metathesis or olefination. Herein, we report detailed synthetic, spectroscopic, kinetic, and computational studies to determine the mechanistic features imparted by iron(III), substrate, and temperature to the catalytic cycle. These data are consistent with an iron(III)-mediated asynchronous, concerted [2+2]-cycloaddition to form an intermediate oxetane as the turnover-limiting step. Fragmentation of the oxetane via Lewis acid-activation results in the formation of five- and six-membered unsaturated carbocycles.
Journal of the American Chemical Society
Iron(III)-catalyzed carbonyl-olefin ring-closing metathesis employs reactivity not typically observed in Lewis acid-catalyzed reactions. In converting a ketone with a pendant olefin into a cycloalkene and a simple carbonyl byproduct, the reaction requires the Lewis acid catalyst to differentiate between the carbonyl of the substrate and that of the byproduct. It is necessary to determine how this solution interaction imparts the desired reactivity in order to best employ this method. Herein, we report detailed kinetic, spectroscopic, and colligative measurements applied towards the identification of the solution structures of the active Fe(III) and Ga(III) carbonyl-olefin metathesis catalysts. These data are consistent with formation of Lewis acid-carbonyl pairs for both metal systems under stoichiometric conditions. However, they diverge in the presence of higher equivalents of carbonyl, with Fe(III) forming highly ligated complexes, and no observed change for Ga(III). These findings are consistent with the resting state identity of the Fe(III) metathesis catalyst changing over the course of the reaction.
Thieme: Stuttgart
The Journal of Organic Chemistry
We report a rapid, one-pot, operationally simple, and scalable preparation of valuable cationic heteroleptic iridium(III) polypyridyl photosensitizers. This method takes advantage of two consecutive microwave irradiation steps in the same reactor vial, avoiding the need for additional reaction purifications. A number of known heteroleptic iridium(III) complexes are prepared in up to 96% yield. Notably, this method is demonstrated to provide the synthetically versatile photosensitizer [Ir(ppy)2(dtbbpy)]PF6 in >1 g quantities in less than 5 h of bench time. We envision this method will help accelerate future developments in visible-light-dependent chemistry.
Chemical Science
Knowledge of the kinetic behavior of catalysts under synthetically relevant conditions is vital for the efficient use of compounds that mediate important transformations regardless of their composition or driving force. In particular, these data are of great importance to add perspective to the growing number of applications of photoactive transition metal complexes. Here we present kinetic, synthetic, and spectroscopic evidence of the mechanistic behavior of fac-Ir(ppy)3 in a visible light-mediated radical addition to 3-methylindole, demonstrating the instability of fac-Ir(ppy)3 under these conditions. During the reaction, rapid in situ functionalization of the photocatalyst occurs, eventually leading to deactivation. These findings demonstrate a conceivable deactivation process for catalytic single electron reactions in the presence of radicophilic ligands. Attempts to inhibit photocatalyst deactivation through structural modification provide further insight into catalyst selection for a given system of interest.
Synlett
ACS Catalysis
Journal of the American Chemical Society
Iron(III)-catalyzed carbonyl-olefin ring-closing metathesis represents a new approach toward the assembly of molecules traditionally generated by olefin–olefin metathesis or olefination. Herein, we report detailed synthetic, spectroscopic, kinetic, and computational studies to determine the mechanistic features imparted by iron(III), substrate, and temperature to the catalytic cycle. These data are consistent with an iron(III)-mediated asynchronous, concerted [2+2]-cycloaddition to form an intermediate oxetane as the turnover-limiting step. Fragmentation of the oxetane via Lewis acid-activation results in the formation of five- and six-membered unsaturated carbocycles.
Journal of the American Chemical Society
Iron(III)-catalyzed carbonyl-olefin ring-closing metathesis employs reactivity not typically observed in Lewis acid-catalyzed reactions. In converting a ketone with a pendant olefin into a cycloalkene and a simple carbonyl byproduct, the reaction requires the Lewis acid catalyst to differentiate between the carbonyl of the substrate and that of the byproduct. It is necessary to determine how this solution interaction imparts the desired reactivity in order to best employ this method. Herein, we report detailed kinetic, spectroscopic, and colligative measurements applied towards the identification of the solution structures of the active Fe(III) and Ga(III) carbonyl-olefin metathesis catalysts. These data are consistent with formation of Lewis acid-carbonyl pairs for both metal systems under stoichiometric conditions. However, they diverge in the presence of higher equivalents of carbonyl, with Fe(III) forming highly ligated complexes, and no observed change for Ga(III). These findings are consistent with the resting state identity of the Fe(III) metathesis catalyst changing over the course of the reaction.
Thieme: Stuttgart
Nature
Nature News & Views A combination of two catalysts — one of which is light-activated — has been used to promote new chemical reactivity, opening up fresh opportunities for the synthesis of structurally complex organic molecules.
The Journal of Organic Chemistry
We report a rapid, one-pot, operationally simple, and scalable preparation of valuable cationic heteroleptic iridium(III) polypyridyl photosensitizers. This method takes advantage of two consecutive microwave irradiation steps in the same reactor vial, avoiding the need for additional reaction purifications. A number of known heteroleptic iridium(III) complexes are prepared in up to 96% yield. Notably, this method is demonstrated to provide the synthetically versatile photosensitizer [Ir(ppy)2(dtbbpy)]PF6 in >1 g quantities in less than 5 h of bench time. We envision this method will help accelerate future developments in visible-light-dependent chemistry.
Chemical Science
Knowledge of the kinetic behavior of catalysts under synthetically relevant conditions is vital for the efficient use of compounds that mediate important transformations regardless of their composition or driving force. In particular, these data are of great importance to add perspective to the growing number of applications of photoactive transition metal complexes. Here we present kinetic, synthetic, and spectroscopic evidence of the mechanistic behavior of fac-Ir(ppy)3 in a visible light-mediated radical addition to 3-methylindole, demonstrating the instability of fac-Ir(ppy)3 under these conditions. During the reaction, rapid in situ functionalization of the photocatalyst occurs, eventually leading to deactivation. These findings demonstrate a conceivable deactivation process for catalytic single electron reactions in the presence of radicophilic ligands. Attempts to inhibit photocatalyst deactivation through structural modification provide further insight into catalyst selection for a given system of interest.
Synlett
ACS Catalysis
Journal of the American Chemical Society
Iron(III)-catalyzed carbonyl-olefin ring-closing metathesis represents a new approach toward the assembly of molecules traditionally generated by olefin–olefin metathesis or olefination. Herein, we report detailed synthetic, spectroscopic, kinetic, and computational studies to determine the mechanistic features imparted by iron(III), substrate, and temperature to the catalytic cycle. These data are consistent with an iron(III)-mediated asynchronous, concerted [2+2]-cycloaddition to form an intermediate oxetane as the turnover-limiting step. Fragmentation of the oxetane via Lewis acid-activation results in the formation of five- and six-membered unsaturated carbocycles.
Journal of the American Chemical Society
Iron(III)-catalyzed carbonyl-olefin ring-closing metathesis employs reactivity not typically observed in Lewis acid-catalyzed reactions. In converting a ketone with a pendant olefin into a cycloalkene and a simple carbonyl byproduct, the reaction requires the Lewis acid catalyst to differentiate between the carbonyl of the substrate and that of the byproduct. It is necessary to determine how this solution interaction imparts the desired reactivity in order to best employ this method. Herein, we report detailed kinetic, spectroscopic, and colligative measurements applied towards the identification of the solution structures of the active Fe(III) and Ga(III) carbonyl-olefin metathesis catalysts. These data are consistent with formation of Lewis acid-carbonyl pairs for both metal systems under stoichiometric conditions. However, they diverge in the presence of higher equivalents of carbonyl, with Fe(III) forming highly ligated complexes, and no observed change for Ga(III). These findings are consistent with the resting state identity of the Fe(III) metathesis catalyst changing over the course of the reaction.
Thieme: Stuttgart
Nature
Nature News & Views A combination of two catalysts — one of which is light-activated — has been used to promote new chemical reactivity, opening up fresh opportunities for the synthesis of structurally complex organic molecules.
ACS Catalysis
Cleavage of carbon–halogen bonds via either single-electron reduction or atom transfer is a powerful transformation in the construction of complex molecules. In particular, mild, selective hydrodehalogenations provide an excellent follow-up to the application of halogen atoms as directing groups or the utilization of atom transfer radical addition (ATRA) chemistry for the production of hydrocarbons. Here we combine the mechanistic properties of photoredox catalysis and silane-mediated atom transfer chemistry to accomplish the hydrodebromination of carbon–bromide bonds. The resulting method is performed under visible light irradiation in an open vessel and is capable of the efficient reduction of a variety of unactivated alkyl and aryl substrates.
The Journal of Organic Chemistry
We report a rapid, one-pot, operationally simple, and scalable preparation of valuable cationic heteroleptic iridium(III) polypyridyl photosensitizers. This method takes advantage of two consecutive microwave irradiation steps in the same reactor vial, avoiding the need for additional reaction purifications. A number of known heteroleptic iridium(III) complexes are prepared in up to 96% yield. Notably, this method is demonstrated to provide the synthetically versatile photosensitizer [Ir(ppy)2(dtbbpy)]PF6 in >1 g quantities in less than 5 h of bench time. We envision this method will help accelerate future developments in visible-light-dependent chemistry.
Chemical Science
Knowledge of the kinetic behavior of catalysts under synthetically relevant conditions is vital for the efficient use of compounds that mediate important transformations regardless of their composition or driving force. In particular, these data are of great importance to add perspective to the growing number of applications of photoactive transition metal complexes. Here we present kinetic, synthetic, and spectroscopic evidence of the mechanistic behavior of fac-Ir(ppy)3 in a visible light-mediated radical addition to 3-methylindole, demonstrating the instability of fac-Ir(ppy)3 under these conditions. During the reaction, rapid in situ functionalization of the photocatalyst occurs, eventually leading to deactivation. These findings demonstrate a conceivable deactivation process for catalytic single electron reactions in the presence of radicophilic ligands. Attempts to inhibit photocatalyst deactivation through structural modification provide further insight into catalyst selection for a given system of interest.
Synlett
ACS Catalysis
Journal of the American Chemical Society
Iron(III)-catalyzed carbonyl-olefin ring-closing metathesis represents a new approach toward the assembly of molecules traditionally generated by olefin–olefin metathesis or olefination. Herein, we report detailed synthetic, spectroscopic, kinetic, and computational studies to determine the mechanistic features imparted by iron(III), substrate, and temperature to the catalytic cycle. These data are consistent with an iron(III)-mediated asynchronous, concerted [2+2]-cycloaddition to form an intermediate oxetane as the turnover-limiting step. Fragmentation of the oxetane via Lewis acid-activation results in the formation of five- and six-membered unsaturated carbocycles.
Journal of the American Chemical Society
Iron(III)-catalyzed carbonyl-olefin ring-closing metathesis employs reactivity not typically observed in Lewis acid-catalyzed reactions. In converting a ketone with a pendant olefin into a cycloalkene and a simple carbonyl byproduct, the reaction requires the Lewis acid catalyst to differentiate between the carbonyl of the substrate and that of the byproduct. It is necessary to determine how this solution interaction imparts the desired reactivity in order to best employ this method. Herein, we report detailed kinetic, spectroscopic, and colligative measurements applied towards the identification of the solution structures of the active Fe(III) and Ga(III) carbonyl-olefin metathesis catalysts. These data are consistent with formation of Lewis acid-carbonyl pairs for both metal systems under stoichiometric conditions. However, they diverge in the presence of higher equivalents of carbonyl, with Fe(III) forming highly ligated complexes, and no observed change for Ga(III). These findings are consistent with the resting state identity of the Fe(III) metathesis catalyst changing over the course of the reaction.
Thieme: Stuttgart
Nature
Nature News & Views A combination of two catalysts — one of which is light-activated — has been used to promote new chemical reactivity, opening up fresh opportunities for the synthesis of structurally complex organic molecules.
ACS Catalysis
Cleavage of carbon–halogen bonds via either single-electron reduction or atom transfer is a powerful transformation in the construction of complex molecules. In particular, mild, selective hydrodehalogenations provide an excellent follow-up to the application of halogen atoms as directing groups or the utilization of atom transfer radical addition (ATRA) chemistry for the production of hydrocarbons. Here we combine the mechanistic properties of photoredox catalysis and silane-mediated atom transfer chemistry to accomplish the hydrodebromination of carbon–bromide bonds. The resulting method is performed under visible light irradiation in an open vessel and is capable of the efficient reduction of a variety of unactivated alkyl and aryl substrates.
Angewandte Chemie International Edition