Auburn University - Engineering
Graduate Research Assistant
Research, design, simulation, fabrication and testing of:
-Nonlinear electronic systems (chaotic oscillators for communications and computing)
-Microelectronic and MEMS devices
-Electronic circuits
Teaching Experience:
Foundations and Concepts in the Physical Sciences
Alabama Prison Arts + Education Project; Staton Correctional Facility; Elmore, AL
Instructor; Adult Continuing Education Full Course
Analog Electronics (ELEC 3700)
Auburn University; Department of Electrical and Computer Engineering; Auburn, AL
Instructor; Undergraduate Level Full Course
Introduction to Vocational Electronics
Alabama Prison Arts + Education Project; Easterling Correctional Facility; Clio, AL
Instructor; Adult Continuing Education Full Course
Introduction to Electrical Engineering Laboratory
Auburn University; Department of Electrical and Computer Engineering; Auburn, AL
Undergraduate Teaching Assistant to Dr. Thomas Denney; Undergraduate Level Laboratory Course
Postdoctoral Researcher
Aubrey worked at Oakridge Institute for Science and Education as a Postdoctoral Researcher
Research Summer Intern - Analog Design
Aubrey worked at IBM as a Research Summer Intern - Analog Design
Assistant Professor
Department of Electrical and Computer Engineering
Electronics Engineer
Aubrey worked at U.S. Army AMRDEC as a Electronics Engineer
Bachelor of Electrical Engineering
Electrical Engineering
Master of Science
Electrical Engineering
Thesis: "Design and simulation of a high frequency exactly solvable chaotic oscillator"
Doctor of Philosophy (Ph.D.)
Electrical Engineering
Graduate Research Assistant
Research, design, simulation, fabrication and testing of:
-Nonlinear electronic systems (chaotic oscillators for communications and computing)
-Microelectronic and MEMS devices
-Electronic circuits
Teaching Experience:
Foundations and Concepts in the Physical Sciences
Alabama Prison Arts + Education Project; Staton Correctional Facility; Elmore, AL
Instructor; Adult Continuing Education Full Course
Analog Electronics (ELEC 3700)
Auburn University; Department of Electrical and Computer Engineering; Auburn, AL
Instructor; Undergraduate Level Full Course
Introduction to Vocational Electronics
Alabama Prison Arts + Education Project; Easterling Correctional Facility; Clio, AL
Instructor; Adult Continuing Education Full Course
Introduction to Electrical Engineering Laboratory
Auburn University; Department of Electrical and Computer Engineering; Auburn, AL
Undergraduate Teaching Assistant to Dr. Thomas Denney; Undergraduate Level Laboratory Course
XXXIII Dynamic Days US 2014
S.A. Hale, A.N. Beal, J.P. Bailey; “Design Considerations for a High-Capacity Chaotic Communica- tions Channel,” XXXIII Dynamic Days US 2014, Georgia Tech, Atlanta, GA, Januaray 2-5, 2014
XXXIII Dynamic Days US 2014
S.A. Hale, A.N. Beal, J.P. Bailey; “Design Considerations for a High-Capacity Chaotic Communica- tions Channel,” XXXIII Dynamic Days US 2014, Georgia Tech, Atlanta, GA, Januaray 2-5, 2014
SIAM Conference on Applications of Dynamical Systems
S.A. Hale, J.P. Bailey, A.N. Beal, R.N. Dean and M.C. Hamilton; “Hardware implementation of cellular automata on coupled networks of exactly solvable chaotic oscillators,” SIAM Conference on Applica- tions of Dynamical Systems, Snowbird, UT, May 19-23, 2013
XXXIII Dynamic Days US 2014
S.A. Hale, A.N. Beal, J.P. Bailey; “Design Considerations for a High-Capacity Chaotic Communica- tions Channel,” XXXIII Dynamic Days US 2014, Georgia Tech, Atlanta, GA, Januaray 2-5, 2014
SIAM Conference on Applications of Dynamical Systems
S.A. Hale, J.P. Bailey, A.N. Beal, R.N. Dean and M.C. Hamilton; “Hardware implementation of cellular automata on coupled networks of exactly solvable chaotic oscillators,” SIAM Conference on Applica- tions of Dynamical Systems, Snowbird, UT, May 19-23, 2013
IMAPS 9th International Conference and Exhibition of Device Packaging
J. Aggas, R.N. Dean, C.G. Wilson, A.N. Beal and L. Jenkins; “Development of substrate embedded magnetics for DC-DC buck converters,” IMAPS 9th International Conference and Exhibition of Device Packaging, Proceedings 2013; Scottsdale/Fountain Hills, AZ, March 11-14, 2013
XXXIII Dynamic Days US 2014
S.A. Hale, A.N. Beal, J.P. Bailey; “Design Considerations for a High-Capacity Chaotic Communica- tions Channel,” XXXIII Dynamic Days US 2014, Georgia Tech, Atlanta, GA, Januaray 2-5, 2014
SIAM Conference on Applications of Dynamical Systems
S.A. Hale, J.P. Bailey, A.N. Beal, R.N. Dean and M.C. Hamilton; “Hardware implementation of cellular automata on coupled networks of exactly solvable chaotic oscillators,” SIAM Conference on Applica- tions of Dynamical Systems, Snowbird, UT, May 19-23, 2013
IMAPS 9th International Conference and Exhibition of Device Packaging
J. Aggas, R.N. Dean, C.G. Wilson, A.N. Beal and L. Jenkins; “Development of substrate embedded magnetics for DC-DC buck converters,” IMAPS 9th International Conference and Exhibition of Device Packaging, Proceedings 2013; Scottsdale/Fountain Hills, AZ, March 11-14, 2013
IMAPS 8th International Conference and Exhibition of Device Packaging
A. Beal, T. Baginski, C. Stevens, M. Hamilton, R. Dean; “Micro-machined high density embedded capacitor technologies for silicon interposers,” IMAPS 8th International Conference and Exhibition of Device Packaging, Proceedings 2012; Scottsdale/Fountain Hills, AZ; March 6-8, 2012 *Awarded 3rd Place Microelectronics Foundation Prize*
XXXIII Dynamic Days US 2014
S.A. Hale, A.N. Beal, J.P. Bailey; “Design Considerations for a High-Capacity Chaotic Communica- tions Channel,” XXXIII Dynamic Days US 2014, Georgia Tech, Atlanta, GA, Januaray 2-5, 2014
SIAM Conference on Applications of Dynamical Systems
S.A. Hale, J.P. Bailey, A.N. Beal, R.N. Dean and M.C. Hamilton; “Hardware implementation of cellular automata on coupled networks of exactly solvable chaotic oscillators,” SIAM Conference on Applica- tions of Dynamical Systems, Snowbird, UT, May 19-23, 2013
IMAPS 9th International Conference and Exhibition of Device Packaging
J. Aggas, R.N. Dean, C.G. Wilson, A.N. Beal and L. Jenkins; “Development of substrate embedded magnetics for DC-DC buck converters,” IMAPS 9th International Conference and Exhibition of Device Packaging, Proceedings 2013; Scottsdale/Fountain Hills, AZ, March 11-14, 2013
IMAPS 8th International Conference and Exhibition of Device Packaging
A. Beal, T. Baginski, C. Stevens, M. Hamilton, R. Dean; “Micro-machined high density embedded capacitor technologies for silicon interposers,” IMAPS 8th International Conference and Exhibition of Device Packaging, Proceedings 2012; Scottsdale/Fountain Hills, AZ; March 6-8, 2012 *Awarded 3rd Place Microelectronics Foundation Prize*
Industrial and Commercial Applications of Smart Structures Technologies 20122, Proceedings of Society of Photographic Instrumentation Engineers (SPIE) Volume: 7979
R. Dean, N. Burch, M. Black, A. Beal and G. Flowers; “Microfibrous metallic cloth for acoustic isolation of a MEMS gyroscope,” Industrial and Commercial Applications of Smart Structures Technologies 20122, Proceedings of Society of Photographic Instrumentation Engineers (SPIE) Volume: 7979; San Diego, CA; March 6-10, 2011 (10pp)
XXXIII Dynamic Days US 2014
S.A. Hale, A.N. Beal, J.P. Bailey; “Design Considerations for a High-Capacity Chaotic Communica- tions Channel,” XXXIII Dynamic Days US 2014, Georgia Tech, Atlanta, GA, Januaray 2-5, 2014
SIAM Conference on Applications of Dynamical Systems
S.A. Hale, J.P. Bailey, A.N. Beal, R.N. Dean and M.C. Hamilton; “Hardware implementation of cellular automata on coupled networks of exactly solvable chaotic oscillators,” SIAM Conference on Applica- tions of Dynamical Systems, Snowbird, UT, May 19-23, 2013
IMAPS 9th International Conference and Exhibition of Device Packaging
J. Aggas, R.N. Dean, C.G. Wilson, A.N. Beal and L. Jenkins; “Development of substrate embedded magnetics for DC-DC buck converters,” IMAPS 9th International Conference and Exhibition of Device Packaging, Proceedings 2013; Scottsdale/Fountain Hills, AZ, March 11-14, 2013
IMAPS 8th International Conference and Exhibition of Device Packaging
A. Beal, T. Baginski, C. Stevens, M. Hamilton, R. Dean; “Micro-machined high density embedded capacitor technologies for silicon interposers,” IMAPS 8th International Conference and Exhibition of Device Packaging, Proceedings 2012; Scottsdale/Fountain Hills, AZ; March 6-8, 2012 *Awarded 3rd Place Microelectronics Foundation Prize*
Industrial and Commercial Applications of Smart Structures Technologies 20122, Proceedings of Society of Photographic Instrumentation Engineers (SPIE) Volume: 7979
R. Dean, N. Burch, M. Black, A. Beal and G. Flowers; “Microfibrous metallic cloth for acoustic isolation of a MEMS gyroscope,” Industrial and Commercial Applications of Smart Structures Technologies 20122, Proceedings of Society of Photographic Instrumentation Engineers (SPIE) Volume: 7979; San Diego, CA; March 6-10, 2011 (10pp)
Society of Industrial and Applied Mathematics (SIAM) Conference on Applications of Dynamical Systems
A.N. Beal, J.P. Bailey, S.A. Hale, R.N. Dean, M.C. Hamilton, J.K. Tugnait, D.W. Hahs and N.J. Corron; “Implementing an exactly solvable chaotic oscillator for chaos communications,” Society of Industrial and Applied Mathematics (SIAM) Conference on Applications of Dynamical Systems, Snow- bird, UT, May 19-23, 2013
XXXIII Dynamic Days US 2014
S.A. Hale, A.N. Beal, J.P. Bailey; “Design Considerations for a High-Capacity Chaotic Communica- tions Channel,” XXXIII Dynamic Days US 2014, Georgia Tech, Atlanta, GA, Januaray 2-5, 2014
SIAM Conference on Applications of Dynamical Systems
S.A. Hale, J.P. Bailey, A.N. Beal, R.N. Dean and M.C. Hamilton; “Hardware implementation of cellular automata on coupled networks of exactly solvable chaotic oscillators,” SIAM Conference on Applica- tions of Dynamical Systems, Snowbird, UT, May 19-23, 2013
IMAPS 9th International Conference and Exhibition of Device Packaging
J. Aggas, R.N. Dean, C.G. Wilson, A.N. Beal and L. Jenkins; “Development of substrate embedded magnetics for DC-DC buck converters,” IMAPS 9th International Conference and Exhibition of Device Packaging, Proceedings 2013; Scottsdale/Fountain Hills, AZ, March 11-14, 2013
IMAPS 8th International Conference and Exhibition of Device Packaging
A. Beal, T. Baginski, C. Stevens, M. Hamilton, R. Dean; “Micro-machined high density embedded capacitor technologies for silicon interposers,” IMAPS 8th International Conference and Exhibition of Device Packaging, Proceedings 2012; Scottsdale/Fountain Hills, AZ; March 6-8, 2012 *Awarded 3rd Place Microelectronics Foundation Prize*
Industrial and Commercial Applications of Smart Structures Technologies 20122, Proceedings of Society of Photographic Instrumentation Engineers (SPIE) Volume: 7979
R. Dean, N. Burch, M. Black, A. Beal and G. Flowers; “Microfibrous metallic cloth for acoustic isolation of a MEMS gyroscope,” Industrial and Commercial Applications of Smart Structures Technologies 20122, Proceedings of Society of Photographic Instrumentation Engineers (SPIE) Volume: 7979; San Diego, CA; March 6-10, 2011 (10pp)
Society of Industrial and Applied Mathematics (SIAM) Conference on Applications of Dynamical Systems
A.N. Beal, J.P. Bailey, S.A. Hale, R.N. Dean, M.C. Hamilton, J.K. Tugnait, D.W. Hahs and N.J. Corron; “Implementing an exactly solvable chaotic oscillator for chaos communications,” Society of Industrial and Applied Mathematics (SIAM) Conference on Applications of Dynamical Systems, Snow- bird, UT, May 19-23, 2013
IMAPS 7th International Conference and Exhibition of Device Packaging 2011
C. Ellis, A. Beal and R. Dean; “Cu MEMS,” IMAPS 7th International Conference and Exhibition of Device Packaging 2011, Proceedings 2011; Scottsdale/Fountain Hills, AZ; March 8-10, 2011
XXXIII Dynamic Days US 2014
S.A. Hale, A.N. Beal, J.P. Bailey; “Design Considerations for a High-Capacity Chaotic Communica- tions Channel,” XXXIII Dynamic Days US 2014, Georgia Tech, Atlanta, GA, Januaray 2-5, 2014
SIAM Conference on Applications of Dynamical Systems
S.A. Hale, J.P. Bailey, A.N. Beal, R.N. Dean and M.C. Hamilton; “Hardware implementation of cellular automata on coupled networks of exactly solvable chaotic oscillators,” SIAM Conference on Applica- tions of Dynamical Systems, Snowbird, UT, May 19-23, 2013
IMAPS 9th International Conference and Exhibition of Device Packaging
J. Aggas, R.N. Dean, C.G. Wilson, A.N. Beal and L. Jenkins; “Development of substrate embedded magnetics for DC-DC buck converters,” IMAPS 9th International Conference and Exhibition of Device Packaging, Proceedings 2013; Scottsdale/Fountain Hills, AZ, March 11-14, 2013
IMAPS 8th International Conference and Exhibition of Device Packaging
A. Beal, T. Baginski, C. Stevens, M. Hamilton, R. Dean; “Micro-machined high density embedded capacitor technologies for silicon interposers,” IMAPS 8th International Conference and Exhibition of Device Packaging, Proceedings 2012; Scottsdale/Fountain Hills, AZ; March 6-8, 2012 *Awarded 3rd Place Microelectronics Foundation Prize*
Industrial and Commercial Applications of Smart Structures Technologies 20122, Proceedings of Society of Photographic Instrumentation Engineers (SPIE) Volume: 7979
R. Dean, N. Burch, M. Black, A. Beal and G. Flowers; “Microfibrous metallic cloth for acoustic isolation of a MEMS gyroscope,” Industrial and Commercial Applications of Smart Structures Technologies 20122, Proceedings of Society of Photographic Instrumentation Engineers (SPIE) Volume: 7979; San Diego, CA; March 6-10, 2011 (10pp)
Society of Industrial and Applied Mathematics (SIAM) Conference on Applications of Dynamical Systems
A.N. Beal, J.P. Bailey, S.A. Hale, R.N. Dean, M.C. Hamilton, J.K. Tugnait, D.W. Hahs and N.J. Corron; “Implementing an exactly solvable chaotic oscillator for chaos communications,” Society of Industrial and Applied Mathematics (SIAM) Conference on Applications of Dynamical Systems, Snow- bird, UT, May 19-23, 2013
IMAPS 7th International Conference and Exhibition of Device Packaging 2011
C. Ellis, A. Beal and R. Dean; “Cu MEMS,” IMAPS 7th International Conference and Exhibition of Device Packaging 2011, Proceedings 2011; Scottsdale/Fountain Hills, AZ; March 8-10, 2011
International Microelectronics Assembly and Packaging Society (IMAPS) 9th International Conference and Exhibition of Device Packaging
A.N. Beal, C.B. Stevens, T.A. Baginski, M.C. Hamilton and R.N. Dean; “Design, simulation and test- ing of high density, high current micro-machined embedded capacitors,” International Microelectronics Assembly and Packaging Society (IMAPS) 9th International Conference and Exhibition of Device Pack- aging, Proceedings 2013; Scottsdale/Fountain Hills, AZ, March 11-14, 2013 *Awarded 1st Place Microelectronics Foundation Prize*
XXXIII Dynamic Days US 2014
S.A. Hale, A.N. Beal, J.P. Bailey; “Design Considerations for a High-Capacity Chaotic Communica- tions Channel,” XXXIII Dynamic Days US 2014, Georgia Tech, Atlanta, GA, Januaray 2-5, 2014
SIAM Conference on Applications of Dynamical Systems
S.A. Hale, J.P. Bailey, A.N. Beal, R.N. Dean and M.C. Hamilton; “Hardware implementation of cellular automata on coupled networks of exactly solvable chaotic oscillators,” SIAM Conference on Applica- tions of Dynamical Systems, Snowbird, UT, May 19-23, 2013
IMAPS 9th International Conference and Exhibition of Device Packaging
J. Aggas, R.N. Dean, C.G. Wilson, A.N. Beal and L. Jenkins; “Development of substrate embedded magnetics for DC-DC buck converters,” IMAPS 9th International Conference and Exhibition of Device Packaging, Proceedings 2013; Scottsdale/Fountain Hills, AZ, March 11-14, 2013
IMAPS 8th International Conference and Exhibition of Device Packaging
A. Beal, T. Baginski, C. Stevens, M. Hamilton, R. Dean; “Micro-machined high density embedded capacitor technologies for silicon interposers,” IMAPS 8th International Conference and Exhibition of Device Packaging, Proceedings 2012; Scottsdale/Fountain Hills, AZ; March 6-8, 2012 *Awarded 3rd Place Microelectronics Foundation Prize*
Industrial and Commercial Applications of Smart Structures Technologies 20122, Proceedings of Society of Photographic Instrumentation Engineers (SPIE) Volume: 7979
R. Dean, N. Burch, M. Black, A. Beal and G. Flowers; “Microfibrous metallic cloth for acoustic isolation of a MEMS gyroscope,” Industrial and Commercial Applications of Smart Structures Technologies 20122, Proceedings of Society of Photographic Instrumentation Engineers (SPIE) Volume: 7979; San Diego, CA; March 6-10, 2011 (10pp)
Society of Industrial and Applied Mathematics (SIAM) Conference on Applications of Dynamical Systems
A.N. Beal, J.P. Bailey, S.A. Hale, R.N. Dean, M.C. Hamilton, J.K. Tugnait, D.W. Hahs and N.J. Corron; “Implementing an exactly solvable chaotic oscillator for chaos communications,” Society of Industrial and Applied Mathematics (SIAM) Conference on Applications of Dynamical Systems, Snow- bird, UT, May 19-23, 2013
IMAPS 7th International Conference and Exhibition of Device Packaging 2011
C. Ellis, A. Beal and R. Dean; “Cu MEMS,” IMAPS 7th International Conference and Exhibition of Device Packaging 2011, Proceedings 2011; Scottsdale/Fountain Hills, AZ; March 8-10, 2011
International Microelectronics Assembly and Packaging Society (IMAPS) 9th International Conference and Exhibition of Device Packaging
A.N. Beal, C.B. Stevens, T.A. Baginski, M.C. Hamilton and R.N. Dean; “Design, simulation and test- ing of high density, high current micro-machined embedded capacitors,” International Microelectronics Assembly and Packaging Society (IMAPS) 9th International Conference and Exhibition of Device Pack- aging, Proceedings 2013; Scottsdale/Fountain Hills, AZ, March 11-14, 2013 *Awarded 1st Place Microelectronics Foundation Prize*
MILCOM 2012 Military Communications Conference
A.N. Beal, J. P. Bailey, S. A. Hale, R. N. Dean, M. Hamilton, J. K. Tugnait, D. W. Hahs, N. J. Corron; “Design and simulation of a high frequency exact solvable chaotic oscillator,” MILCOM 2012 Military Communications Conference, Proceedings 2012; Orlando, FL; October 29 November 1, 2012